Concrete Mixer JS

Feature of Concrete Mixer JS
1. Mixing tank:
  ---The cylinder cross-section for the inverted "Ω"-shaped.
  ---Adopting the overall annealing process to deal with the cylinder welding to prevent stress and deformation after welding;
  ---Its scale-board and leaf are made from wear-resistant alloy cast iron, and it is of well-structured and long service life;
2. The mixing arms are set in the location of "45 degrees", "60 degrees", "90 degrees" to achieve a full mixing of materials;
3. Lubrication system:
  ---Adopting shaft sealing structure and the automatic lubrication system to reduce grease lubricant consumption cost as well as its impact on the concrete performance;
  ---Can choose the different forms of oiling: continuous oiling, intermittent oiling and manual oiling.
4. Transmission system: cycloid-type transmission and shaft-mounted transmission structure;
5. Shaft sealing structure:
  ---Its inner layer is labyrinth seal, which is made of special wear-resistant material, the middle layer is a number of special rubber rings and the pressurized oil protection, the outer layer has a floating seal ring with a rubber ring to prevent the plasma leakage;
  ---With a 100 mm isolation zone between the bearing seat and shaft sealing area to completely isolate the leakage of concrete slurry from the bearing, and thus to extend the service life of the critical parts.
6. JS500/750:
  ---Adopting the two-horizontal-axis, which is of easy operation and quick setting up. The electrical components are installed by the clip orbit, which are of convenient operation and maintenance.
  ---There are three types of discharge height for choice
  ---1.6m、2.2m、3.8m, and the mixing concrete can be received and conveyed by the mobile dump truck or concrete mixer truck. It is of low-cost, compact structure, and all the modules are suitable for containerized transport.

Application of Concrete Mixer JS
Based on the advantage of driving steady and convenient installation, this key concrete equipment is widely used in the small and medium-sized construction.

Technical Parameter of Concrete Mixer JS

Model	Nominal capacity (L)	Feeding capacity (L)	Cycle index / h	Max. aggregate size ① (mm)		Overall dimensions (mm)			Total weight (kg)	Mixing power (kW)
				Gravel	Cobble stone	Length	Width	Height
JS1000②	1000	1600	50	60	80	3430	2090	1420	5200	2X18.5
JS1000	1000	1600	50	60	80	3100	2090	1370	5200	2X18.5
JS1500	1500	2400	50	60	80	3100	2090	1470	5300	2X30
JS2000	2000	3200	48	60	80	3450	2470	1470	8600	2X37
JS3000	3000	4800	44	60	80	3900	2470	1700	10150	2X55
JS4000	4000	6400	42	60	80	4200	2850	1940	13500	2X75
JS5000	5000	8000	40	60	80	5370	3180	2190	17100	4X45
JS6000	6000	9600	40	60	80	6260	3180	2190	20600	4X55

Note
① Customizable
② This model provides cycloidal drive, and other models offer shaft-mounted drive.